PFR1-816 Rear Suspension Front Arm Bush
These bushes should be fitted with the supplied washers which are to be fitted on the “top hat” face of the bush. Fit the nylon washer against the bush and the metal washer against the nylon one where applicable.
On certain model cars washers may not be required if the bushes are to be mounted between two chassis faces. Always use a washer where there is no plate against the face of the bush.
Where not fitted between two chassis
Faces use large diameter washer on outside
Face.
Always check suspension alignment after fitting POWERFLEX bushes
Reference #6 in picture
Price is for a single item,4 units needed per car